4.1 Filtering the Endpoint Activity Window
You can modify the results shown in the Endpoint activity window to include activity for the
following:
Access control status
Endpoint test status
Cluster
NetBIOS name
IP address
MAC address
User ID
Windows domain
NAC policy
Operating system
Timeframe
Number of endpoints to display
NOTE: Most Vista endpoints will not provide a User ID to list in the user id column.
The following sections contain more information:
Section 4.1.1, "Filtering by Access Control or Test Status," on page 138
Section 4.1.2, "Filtering by Time," on page 139
Section 4.1.3, "Limiting Number of Endpoints Displayed," on page 140
Section 4.1.4, "Searching," on page 141
4.1.1 Filtering by Access Control or Test Status
Home window>>Endpoint activity window
138 Novell ZENworks Network Access Control Users Guide