Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 98

NOTE:
8 Select the type of the re-authentication OID from the OID type drop-down list:
INTEGER
unsigned INTEGER
TIMETICKS
IPADDRESS
OBJID
STRING
HEX STRING
DECIMAL STRING
BITS
NULLOBJ
9 Enter the OID re-authentication value used to re-authenticate an endpoint in the OID value
text field.
10 Select the Use a different OID for MAC authentication check box to re-
authenticate using a different OID when the supplicant request is for a MAC authenticated
device.
10a Enter the Re-authenticate OID used to re-authenticate an endpoint. The strings
"${Port}" and "${MAC_DOTTED_DECIMAL}" are substituted for the port and MAC
address of the endpoint to be re-authenticated.
10b Select the type of the re-authentication OID from the OID type drop-down list:
10c Enter the OID re-authentication value used to re-authenticate an endpoint in the OID
value text field.
TIP: Click revert to defaults to restore the default settings.
98 Novell ZENworks Network Access Control Users Guide
Figure 3-33 on page 97 shows an example for WESM zl.
INTEGER
unsigned INTEGER
TIMETICKS
IPADDRESS
OBJID
STRING
HEX STRING
DECIMAL STRING
BITS
NULLOBJ