Table of Contents
Advertisement
When the Password is Known
To reset the Novell ZENworks Network Access Control administrator user interface
User Name and Password when known:
See
Section 3.5.9, "Modifying the MS root Account Password," on page
When the Password is Unknown
To reset the Novell ZENworks Network Access Control administrator user interface
User Name and Password when unknown:
Command line window
1 Create a text file with the following lines:
Compliance.ObjectManager.AdminUser=
Compliance.ObjectManager.AdminPassword=
Compliance.UI.FirstTimeConfigCompleted=true
Enter characters following the equal sign that are the password (for example, CwR0(tW).
2 Save the file and copy it to the Novell ZENworks Network Access Control server (either MS or
ES).
3 Log into the Novell ZENworks Network Access Control server as root.
4 Enter the following command:
setProperty.py -f<filename>
5 From a workstation, open a browser window and point to the Novell ZENworks Network
Access Control MS.
6 Enter a new User Name and Password when prompted.
16.14 NTLM 2 Authentication
If your network is configured for Windows NT LAN Manager version 2 (NTLMv2) challenge/
response authentication only, make the following change to the smb.conf file:
To enable Novell ZENworks Network Access Control for NTLM v2:
Command line window
1 Log in as root to the Novell ZENworks Network Access Control server (using SSH or login
directly).
2 Open the following file with a text editor such as vi:
/etc/samba-tng/smb.conf
3 Add the following line:
client ntlmv2 = auto
4 Save and exit the file.
366 Novell ZENworks Network Access Control Users Guide
55.
Advertisement
Table of Contents
