Authentication Settings - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

3.11.2 Authentication Settings

The following sections contain more information:
"Selecting the RADIUS Authentication method" on page 74
"Configuring Windows Domain Settings" on page 75
"Configuring OpenLDAP Settings" on page 77
Selecting the RADIUS Authentication method
To select the RADIUS authentication method:
Home window>>System configuration>>Quarantining>>802.1X quarantine method radio button
1 Select the Local radio button in the Basic 802.1X settings area.
2 Select an End-user authentication method:
Manual — RADIUS server authentication settings are configured manually from the
command line. See
for 802.1X," on page 264
Windows domain — Authentication requests are handled by a Windows domain through
NTLM protocol. The ES must be able to join to the domain for this to work. See
"Configuring Windows Domain Settings" on page 75
OpenLDAP — User credentials are queried from an OpenLDAP directory service. See
"Configuring OpenLDAP Settings" on page 77
Proxy — Authentication requests are proxied to a remote RADIUS server configured to
allow the ES as a client NAS.
3 Click ok.
74 Novell ZENworks Network Access Control Users Guide
Section 11.3.2, "Enabling Novell ZENworks Network Access Control
for configuration information.
for more information.
for more information.