Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 309

/etc/sysconfig/iptables
7c Add the following line before the # REJECT lines in the RH-Lokkit-0-50-INPUT
section, and after the RELATED,ESTABLISHED line:
7d -A RH-Lokkit-0-50-INPUT -s <INFOBLOX_IP> -p tcp -m tcp --
dport 514 -m state --state NEW -j ACCEPT
Where:
<INFOBLOX_IP> is the IP address of the Infoblox server.
7e Restart iptables by entering the following at the command line:
fw_control start
service nac-es start
Remote Device Activity Capture 309