Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 274

set radius timeout 30
set radius server 1 10.11.100.10 1812 02108000AE5BA9C47EDC24F2CA6529EE4CCC8930B
BD70F5AAA2CF0C5DBAA5DA97FADFE95
set radius enable
!
®
Extreme
TIP: When authenticating via the onboard FreeRADIUS server, you need to add the administrative
line in the RADIUS users file.
TIP: Change the admin password to a non-blank password.
create vlan "Operations"
create vlan "CommandControl"
create vlan "Quarantine"
create vlan "Guest"
create vlan "Temp"
# RADIUS configuration
#
enable radius
configure radius primary shared-secret encrypted "ouzoisgprdr#s{fqa"
configure radius primary server 10.10.100.10 1812 client-ip 10.10.100.1
# Network Login Configuration
configure vlan Temp dhcp-address-range 10.10.5.100 - 10.10.5.150
configure vlan Temp dhcp-options default-gateway 10.10.5.1
configure vlan Temp dhcp-options dns-server 10.10.100.11
configure vlan Temp dhcp-options wins-server 10.10.100.10
enable netlogin port 33 vlan Temp
enable netlogin port 34 vlan Temp
enable netlogin port 35 vlan Temp
enable netlogin port 36 vlan Temp
enable netlogin port 37 vlan Temp
enable netlogin port 38 vlan Temp
enable netlogin port 39 vlan Temp
enable netlogin port 40 vlan Temp
configure netlogin redirect-page "https://10.10.100.100:89"
ExtremeWare
TIP: When authenticating via the onboard FreeRADIUS server, you need to add the administrative
line in the RADIUS users file.
TIP: Change the admin password to a non-blank password.
create vlan "Quarantine"
create vlan "Test"
# RADIUS configuration
#
enable radius
configure radius primary shared-secret encrypted "ouzoisgprdr#s{fqa"
274 Novell ZENworks Network Access Control Users Guide
Summit 48si