Starting The Windows Service; Viewing Version Information - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

2. Add another line just below the initial ES with the new IP address or addresses:
wrapper.app.parameter.9=172.17.100.150
wrapper.app.parameter.10=172.50.50.7
3. Increment the rest of the wrapper.app.parameter numbers by the number of ESs
added. For this example of adding two ESs, increment by two; change 10 to 12, 11 to
13, and so on
wrapper.app.parameter.11=-i
wrapper.app.parameter.12="\Device\NPF_{54052575-E4CC-46A5-B626-
9167DD4F9BE3}"
wrapper.app.parameter.13=-f
wrapper.app.parameter.14="udp src port 67"

13.1.6 Starting the Windows Service

You can start the Windows service manually, or you can reboot the Windows server, which starts the
service automatically.
To start the Windows service manually:
Windows server
1 Select Start>>Settings>>Control Panel>>Administrative
Tools>>Services. The Services window appears:
NAC Endpoint Activity Capture Service
Figure 13-11
2 Right-click on the NAC Endpoint Activity Capture service and select Start.
The service is set to automatic start at the next reboot by default.

13.1.7 Viewing Version Information

To view version information:
Windows server
1 Select Start>>Settings>>Control Panel>>Add or Remove Programs.
2 Click once on the DAC listing.
Remote Device Activity Capture 305