Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 297

NOTE: If you have made configuration changes to the wrapper.conf file in a previous version of
DAC, when you remove and re-install DAC, your changes are not saved. You will need to re-enter
any changes, such as adding additional interfaces or ESs to the wrapper.conf file after installing
DAC. You can save your previous wrapper.conf file before you uninstall DAC for reference; do not
save the old wrapper.conf file and copy it over the new wrapper.conf file.
To run the Windows installer:
Windows server
1 Navigate to the EXE file downloaded in
page 296.
2 Double-click on the EXE file. The DAC InstallShield Wizard Welcome window appears:
The DAC InstallShield Wizard Welcome Window
Figure 13-1
3 Click Next. The Setup Type window appears:
RDAC Installer, Setup Type
Figure 13-2
Section 13.1.1, "Downloading the EXE File," on
Remote Device Activity Capture 297