Configuring The Management Console's Permissions Settings - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual

5 Uncheck Secure Authentication in the Service Connection options.
6 Specify the Account name using LDAP format. For example, in "cn=admin,o=acmeserver" cn
is the user and o is the object where the user account is stored.
7 Specify the password for the account.
NOTE: The password should be set to not expire and this account should never be disabled.
8 Click Test to verify communication to the directory service. If communication cannot be
established, the user is notified of the error. Any inaccurate information is corrected, where
possible. by the interface during the test.
Figure 7-7
9 Click Save to add this directory service to the database, then click New to add another directory
service to the database.
10 Click OK or Cancel to exit the Configuration window and return to the login screen.
7.2.2 Configuring the Management Console's Permissions
Settings
Permissions is found on the Tools menu of the Management Console and is accessible only by the
primary administrator for the Management Service and any other users who have been granted
permissions access by that administrator. This control is not available when running the Stand-Alone
Management Console. See
Installation," on page 71
The permissions settings define which user or group of users are permitted access to the
Management Console, Publish Policies, and Change Permission Settings.
During the Management Server installation, an administrator or Resource Account name is entered
into the configuration form. After a successful test has been performed and the user information is
saved, the permissions are automatically granted to this user.
50 ZENworks Endpoint Security Management Installation Guide
Completed Directory Screen
Chapter 10, "ZENworks Endpoint Security Management Unmanaged
for more details.