Omron Z550 Operation Manual page 56

SECTION 3
Setting Measurement Conditions (Expert Menu)
Setting Detailed Sensitivity Conditions
These detailed settings may be specified when either [Auto] or [Multi] has been selected as the
sensitivity adjustment method. The default setting at the shipment is sufficient under normal
circumstances. After changing the settings, perform a workpiece measurement to check that
measurement can still be performed correctly.
1.
Select [Image/Details].
The setting screen for sensitivity details appears.
2.
Make the settings for each item.
Refer to the next page for more details.
3.
Select [End].
The setting will be registered and the screen display returns to
Z550
54
Operation Manual
Scn 0 Set
Image
Meas method
Detect set
Region
Meas set
SensitivityDet
Extra set
Details
Meas
mode
Scn 0 Set
Priority Sampling time
Upper
Lower
Gradations
End
1
.
[25]
[ 1]
[170]