Omron Z550 Operation Manual page 55

When Selecting [Multi]
Position a reference workpiece and perform the following operations.
The sensitivity level is automatically set for each line based on the brightness of the reflection
from the reference workpiece.
1.
Select [Image/Sensitivity].
The selections for sensitivity adjustment appear.
2.
Select [Multi].
The multiple sensitivity setting screen appears.
3.
Check that the workpiece is positioned within the
measurement range and press the ENT Key.
The sensitivity level will be registered and the screen display returns to
After the settings have been completed, fine adjustment can be made under [Details].
p.54
Setting Measurement Conditions (Expert Menu)
Scn 0 Set
Image
Meas method
Detect set
Region
Meas set
Sensitivity
Extra set
Details
Meas
mode
Scn 0 Set
1
.
SECTION 3
Auto
Fixed
Multi
Line beam image
Z550
Operation Manual
53