SECTION 3
Setting Measurement Conditions (Expert Menu)
Selecting the Measurement Method
It is possible to measure with higher accuracy by changing the measurement range in the height
direction.
The measurement range must be specified first. When the measurement range is changed, the data of
the displayed scene is cleared.
Only the measurement range in the height direction is specified here. The measurement range in the width
direction is automatically changed according to this setting.Please refer to Setup Manual for the
measurement range of each sensor.
1.
Select [Image/Meas method].
Z550
48
Operation Manual
Sensor
Reference distance
Measurement
center
Measurement range
(Width)
Measurement range
(Height)
Scn 0
Set
Image
Meas method
Detect set
Region
Meas set
Sensitivity
Extra set
Details
Meas mode
Output