Omron Z550 Operation Manual page 96

SECTION 3
Setting Measurement Conditions (Expert Menu)
The measurement line setting screen for roughness
appears.
7.
Specify the start and end lines.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
A confirmation message appears.
8.
Select [Execute].
The setting will be registered and the screen display returns to
Z550
94
Operation Manual
Reference will be
registered. OK?
Execute Cancel Back
2
.