Omron Z550 Operation Manual page 151

Setting Display Range
It is possible to change the range of the following two axes displayed on the screen.
V axis
T axis
Axis Setting range
Vert -999.999999 to 999.999999
Time 1.50 to 30.00 s
(Set to 5.00 s by default
setting)
Vertical setting
Scn 0 Run
Maximum display
value
V axis
Minimum display
value
The maximum and minimum values displayed on the screen are
set.Different values can be set for each output.The default setting
at the shipment varies depending on the model of the sensor
connected.
The display time range for the waveform displayed on the screen
is set.This setting is the same as for the Profile Monitor screen.
The setting that has been specified the last will become effective.
1div T: 0.996 [s]
V:0.1250[mm]
T axis
(Display time)
Conversion values for V and T axis
1div
V
T
Meaning
SECTION 4
Other Functions
Z550
149
Operation Manual