Omron Z550 Operation Manual page 51

Sensor selections appear if two sensors are connected.
If only one sensor is connected, proceed to the operation
3
in .
2.
Select which sensor to be used in the displayed
scene.
The sensor to be used is selected for each scene;
therefore, it is possible to prepare setup settings,
including sensor installation status, for up to two
sensors.
The selections for measurement range appear.
3.
Select the measurement range while monitoring the
image.
4.
Select the setting by pressing the ENT Key.
The setting will be registered and the screen display returns to
Coordinates when converting the measurement range
p.179
Setting Measurement Conditions (Expert Menu)
Sensor 0
Sensor 1
Scn 0 Set
0.50mm
0.42mm
0.33mm
0.25mm
0.17mm
0.08mm
1
.
SECTION 3
Z550
49
Operation Manual