Omron Z550 Operation Manual page 74

SECTION 3
Setting Measurement Conditions (Expert Menu)
Height
Measure the height of the workpiece.
The following conditions will be used as an example for describing the setting procedures.
1.
Select [Meas set].
A list of outputs appears.
2.
Select an output for which [Height] is set.
In this example, select [OUT1].
Z550
72
Operation Manual
Height
Measurement target lines
Scn 0
Scn 0
Set
Image
Detect set
Meas set
Extra set
Meas mode
Output
Set
OUT0:Height
OUT1:
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7: