Step 2 Selecting The Measurement Method - Omron Z550 Operation Manual

SECTION 2
Basic Operations
2
Selecting the Measurement Method
Step
It is possible to measure with higher accuracy by changing the measurement range in the height
direction.
Only the measurement range in the height direction is specified here. The measurement range in the width
direction is automatically changed according to this setting. Please refer to Setup Manual for the
measurement range of each sensor.
1.
Select [Set].
The initial screen of the conversational menu appears.
2.
Select [Next].
Z550
34
Operation Manual
Sensor
Reference distance
Measurement
center
Measurement range
(Width)
Measurement range
(Height)
Scn 0 Run
Set
Run
Tools
System
Save
Perform settings in
the following order.
STEP 1:Measurement method
STEP 2:Measurement region
STEP 3:Sensitivty adj method
STEP 4:Edge detection method
Next Back