Omron Z550 Operation Manual page 191

Option/Setting
Item
Format Judgment output A
(Default setting)
Judgment output B Judgment results for OUT0 through OUT7 will be output as
OFF Delay 0 to 99999
(Set to 0 by default
setting)
GATE ON delay * 1 to 1000.0ms
(Set to 1 ms by
default setting)
GATE ON time * 1 to 1000.0ms
(Set to 5 ms by
default setting)
* The GATE signal is only output when [Hold (External)] or [Hold (Self)] is specified for [Extra set/
Logging/Hold].The GATE signal is always off if [Free] or [Logging] has been selected.
Output timing differences due to off delay time
Example 1: When the off delay time is 0
HI Judgment Value
LO Judgment Value
Terminal indicating HIGH
Terminal indicating PASS
Terminal indicating LOW
Example 2: When the off delay time is specified
HI Judgment Value
LO Judgment Value
Terminal indicating HIGH
Terminal indicating PASS
Terminal indicating LOW
range
When this function is selected, the details of the judgment
(HIGH/PASS/LOW/ERROR) are output.Note that the judgment
results can only be output for OUT0 to OUT3. The judgment
results for OUT4 to OUT7 cannot be output.
either OK or NG.
Set a time delay that allows the external device to receive the
result.
The off delay time is obtained by multiplying the value set here
by 9.96 ms.
Set the time delay from when the result is output to the terminal
block to when the GATE signal is turned on.
This is the time to wait until stable output data can be
obtained.Set this time so that it is longer than the delay time
involved in data transmission to external devices.
Set the length of time that the GATE signal remains on.
Set a value that allows the external device to receive the
measurement result.
Measurement value
OFF
ON
OFF
ON
OFF
ON
* The GATE signal is always off.
Measurement value
OFF
ON
OFF
ON
OFF
ON
* The GATE signal is always off.
Communication with External Devices
Meaning
OFF Delay
SECTION 6
Z550
189
Operation Manual