Omron Z550 Operation Manual page 211

Function 2......Cancels force-zero.
ZERO 1 <Output>
Input
Specify an output in the same way as in Function 1 (between 0 and 8).
Command executed correctly
Output
Command not executed correctly
Example:
ZERO 1 1
Delimiter
Input
Force-zero for OUT1 is canceled.
OK
Delimiter
Output
Commands that Obtain Measurement Results
CAPTURE
Function 1......Performs measurement once and obtains the profile data (distribution of height
measurements at 1024 points).
(Can only be performed when the measurement mode is [Trg (RS-232C)].)
CAPTURE
Delimiter
Input
(In case of text transmission)
Output
Command executed correctly: Number of measurement values
Other errors
LD-OFF
Communication with External Devices
Delimiter
: OK
: ER
Profile data transmission start line
Profile data transmission end line
Profile data transmission step
Inclination compensation status
Measurement value of the start line
⋅
⋅
Measurement value of the end line
OK
Delimiter
: ER
Delimiter
: LDOFF
Delimiter
SECTION 6
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Operation Manual
Z550
209