Omron Z550 Operation Manual page 164

SECTION 4
Other Functions
Using the TRIG Key to Specify the Start and End of Test
Measurements
1.
Perform the same operations as those described in 1. to 3. in the procedure for selecting [#
times] to display the test method selection menu.
p.160
A menu for selecting test methods appears.
2.
Set the [Test mode] to [Trg key].
3.
Select [End].
The focus returns to the test measurement screen.
4.
Display the output whose measurement value you want to check.
Up/Down key: Switches between outputs.
5.
Press the TRIG Key.
The testing starts and the screen display changes to
[RUN].
6.
Press the TRIG Key again in order to end the test
measurements.
Z550
162
Operation Manual
Scn 0 Tools
OUT0 +000.2332mm
No. AVE MAX-MIN
NUM
1
Test mode Trg key
2
# of samples: [ 100]
3
4 End
5
Press the TRIG Key again.
changes from [STOP] to [RUN].
During measurement, [RUN] flashes.
Scn 0 Tools
+000.2332mm
OUT0
No. NUM AVE MAX-MIN
1
2
3
4
5
[STOP]
[ RUN ]