Omron Z550 Operation Manual page 153

Changing the Profile Monitor Screen Display
It is possible to change the screen view mode, the display range of a waveform, and the cursor
position in the profile or trend display.
Changing View Mode
The following two types of view modes are available.
This setting is the same as for the Trend Monitor screen. The setting that has been specified the
last will become effective.
Option
Thru The shaded 3D image acquired from the sensor appears continuously.
(default setting)
Trig The shaded 3D image appears in response to the trigger timing.Updated when the
trigger turns ON.
1.
Display the Profile Monitor screen and press the
SHIFT and ENT Keys.
The adjustment menu appears.
2.
Press the TRIG Key.
Other Functions
Meaning
Scn 0 Run
Thru
Mode
ESC TRG
Display
Sensitvy
Output
Meas set
Extra set
SECTION 4
ENT
Test
Z550
151
Operation Manual