Omron Z550 Operation Manual page 155

Setting Display Range
It is possible to change the range of the following two axes displayed on the screen.
V axis
T axis
Axis Setting range
Vert -999.999999 to 999.999999
Time 1.50 to 30.00 s
(Set to 5.00 s by default
setting)
3D direction: V axis
Scn 0 Run
T axis
1div T: 0.996 [s]
V:0.1250[mm]
V axis
Conversion value of 1 square (1 div)
The maximum and minimum values displayed on the screen are
set.The default setting at the shipment varies depending on the
model of the sensor connected.
The display time range for the waveform displayed on the screen
is set.This setting is the same as for the Trend Monitor screen.
The setting that has been specified the last will become effective.
Other Functions
V axis
T axis
The unit per square (1 div) in the trend
display area is displayed here.
T
1div
V
Meaning
SECTION 4
Z550
153
Operation Manual