Omron Z550 Operation Manual page 172

SECTION 4
Other Functions
Loading
In the example provided below, the procedure for loading the scene data into scene 2 is
explained.
1.
Perform the same operations as those described in 1. to 3. in the saving procedure to connect
the Controller and PC.
p.166
2.
Select [Transfer/Send File] from the Hyper Terminal menu.
3.
Select the file to be loaded.
4.
Set the protocol to [Xmodem].
5.
Select [Send].
The data transfer screen appears.
6.
Once the preparations have been completed on the
PC, enter the Tools mode.
Z550
170
Operation Manual
Data
PC
Scn 0 Run
Set
Run
Tools
System
Save