Omron Z550 Operation Manual page 160

SECTION 4
Other Functions
Initializing Scene Measurement Conditions
(Clearing Scenes)
Use the following procedure to clear measurement conditions set in the Set mode, and to return
scenes to their default settings.
The measurement conditions must be cleared separately for each scene.
1.
Move the cursor to [Scn] and press the ENT Key.
The selections for scenes 0 to 8 appear.
Use the Down key to scroll to display scenes 9 to 15.
2.
Move the cursor to the scene to be cleared and
press the SHIFT and ESC Keys.
The selections appear.
3.
Select [Clear].
A confirmation message appear.
4.
Select [Execute].
The scene data will be cleared.
Z550
158
Operation Manual
Scn 0 Run
Scn 0 Run
Scn0
Scn1
Scn2
Scn3
Scn4
Scn5
Scn6
Scn7
Scn8
Copy
Clear
Scn 0
Clear the current
scene data?
Execute Cancel