Omron Z550 Operation Manual page 218

SECTION 6
Communication with External Devices
Output
The accumulated data is cleared under the following circumstances:
• At startup
• When clearing a scene
• When switching a scene
• When loading scene data
• When loading system data
• At initialization
• When changing trigger settings
• When the measurement period is changed
If the measurement is paused (e.g., when changing to the Set mode), logging data is maintained,
but the data accumulated by the external trigger and self trigger is cleared.
Z550
216
Operation Manual
• Different data is output depending on the setting in [Extra set/Hold&Logging].
Setting
Free ER
Hold (External) Data accumulated in the period from the start of measurement to the
end of measurement
Hold (Self)
Logging Logging data from the latest data and up to 3000 points in the past
Command executed correctly
At measurement error
Other errors
No trigger occurred
LD-OFF
If the mode is set to [Free]
If the mode is set to [Hold (External)] or [Hold (Self)], but
this command is executed during the trigger period: ER
Output data
: Number of measurement values
Measurement value
Delimiter
⋅
⋅
⋅
Measurement value
Delimiter
OK
Delimiter
: -999.999999
Delimiter
: ER
Delimiter
: RST
Delimiter
: LDOFF
Delimiter
: ER
Delimiter
Delimiter
Delimiter