Clearing Measurement Items
Clear the measurement items that have been set for the outputs.
Clearing separately for each scene
1.
Move the cursor to the output whose measurement
item is to be cleared, and press the ENT Key.
The selections appear.
2.
Select [Delete].
A confirmation message appears.
3.
Select [Execute].
The measurement item for the selected output is cleared and the screen display will return to
Setting Measurement Conditions (Expert Menu)
p.158
Scn 0
Set
OUT0:Height
OUT1:Step: 2 pts
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Scn 0
set
Change
Calibrate
Output
Delete
Delete OUT0 settings.
Execute
SECTION 3
Cancel
1
.
Z550
Operation Manual
99