Omron Z550 Operation Manual page 73

Measurement item
Angle
Cross-sectional area
Arithmetic average
roughness
Maximum roughness
Define
When using the position compensation function, set [Detect set] and [Meas set] in this order.
Setting Measurement Conditions (Expert Menu)
Meaning
The inclination between the two specified points is
measured.
The cross-sectional area of the specified region is
measured.
The roughness of the specified region is
measured.The average of absolute differences from
the reference line is calculated.
The roughness of the specified region is
measured.The difference between the maximum
deviations in both directions from the reference line
is calculated.
The measurement items are set by a user-defined
equation.
The measurement result of an output can be
assigned to the equation.
SECTION 3
Explanatory
Reference
diagram
p.87
p.89
p.92
p.92
p.95
Z550
Operation Manual
71