Omron Z550 Operation Manual page 110

SECTION 3
Setting Measurement Conditions (Expert Menu)
The selections for output appear.
2.
Move the cursor to the output to be set and press
the ENT Key.
The selections appear.
3.
Select [Output].
The setting screen for output conditions appears.
4.
Specify [Span] and [Offset].
5.
Select [End].
The setting will be registered and the screen display returns to
Z550
108
Operation Manual
Scn 0 Set
OUT0:Height
OUT1:Step: 2 pts
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Scn 0 Set
Change
Calibrate
Output
Delete
Scn 0 Set
Upper [mm]
[
Lower [mm]
[ -0.125000]
Hold
Zero [mm]
[
Span
[
Offset [mm]
[
Slant error
Unit
End
3
.
0.125000]
None
0.000000]
1.000000]
0.000000]
Inactive
mm