Setting Span And Offset; Span - Omron Z550 Operation Manual

Setting Span and Offset

The span and offset can be set in order to fine-tune the measurement values. They can be specified for
each output.
They have been set automatically after executing the calibration; make modification as necessary.
Item

Span

Gain attribute of the sensor characteristic. (0.20000 to 4.0000, set to 1.000000 by default setting)
Offset It is possible to add/subtract a fixed value to/from the measurement value.
(-999.999999 to 999.999999, set to 0.000000 by default setting)
1.
Select [Meas set].
Setting Measurement Conditions (Expert Menu)
Meaning
Measurement value
mm
4.0
0.2
Displacement
of workpiece
Measurement value
(mm)
Displacement
of workpiece
Scn 0
Image
Detect set
Meas set
Extra set
Meas mode
Output
SECTION 3
Set
Operation Manual
Z550
107