Omron Z550 Operation Manual page 122

SECTION 3
Setting Measurement Conditions (Expert Menu)
Setting [Hold (External)]
The display start position when the external trigger is turned on can be specified together with
the time until the measurement is completed.
1.
Select [Extra set/Hold&Logging].
The selections appear.
2.
Select [Hold (External)].
The screen for specifying the trigger on position appears.
3.
Specify the trigger on position.
The waveform display will start from this position when the
trigger is turned on.
(Only when the display mode is [Trig])
The trigger position is
set at the center.
That way, it is possible to
view the waveform before
and after the trigger is
turned on.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move the cursor quickly.)
4.
Select the setting by pressing the ENT Key.
Z550
120
Operation Manual
The trigger position is
set at the left edge.
That way, it is possible to
focus on the part of the
waveform after the trigger
is turned on.
Scn 0 Set
Image
Detect set
Meas set
Extra set
# to avg
Meas mo
Hold&Logging
Output
Details
Free
Hold(External)
Hold(Self)
Logging
Trigger-ON position
Hold