Setting The Profile Output Method; Profile P - Omron Z550 Operation Manual

Setting the Profile Output Method

Specify the communication method when profile data is output according to the following
procedure.
1.
Enter the System mode and select [Profile].
p.174
The setting screen appears.
2.
Select a value for each item.
3.
Select [End].
The setting will be registered and the screen display returns to
Item
Out data
Option/Setting range
Text The profile data is transmitted in text format.The post-
processing will be simple, but the communication time
becomes longer as the amount of data is large.
XMODEM The profile data is converted to binary format and then
(Default setting) transmitted. The number of data items is smaller than
for the text format and the communication time is
shorter, but the following precautions must be taken.
• It is necessary to convert the binary format data in
order to perform post-processing.
• Software supporting XMODEM communication is
required.
Communication with External Devices
Scn 0 System
Comm
Profile
Environment
Initialize
Version
Scn 0 System
:
Out data
:
Start data
:
End data
:
Data interval
:
Data size
:
Data unit
End
1
.
Meaning
Communication flow p.212
SECTION 6
Xmodem
[ 0]
[1023]
[ 1]
3Byte
mm
Z550
197
Operation Manual