The measurement region setting screen for bottom face
region 2 appears.
6.
Repeat the operations in
characteristic quantity for the measurement lines
and measurement point for bottom face region 2.
The measurement line setting screen for the top face
region appears.
7.
Repeat the operations in
characteristic quantity for measurement lines and
measurement point for the top face region.
A confirmation message appears.
8.
Select [Execute].
The setting will be registered and the screen display returns to
Setting Measurement Conditions (Expert Menu)
4.
5.
to
to set the
4.
5.
to
to set the
Average
Peak
Bottom
Average
Peak
Bottom
Reference will be
registered. OK?
Execute
Cancel Back
2
.
SECTION 3
Z550
77
Operation Manual