Related Manuals for Omron ZX-GT
Summary of Contents for Omron ZX-GT
- Page 1 N E W Smart Sensor Wide Laser Beam CCD Measurement Sensor ZX-GT 10-µm Accuracy by 500-mm Range...
- Page 2 Measurements can be consistently taken within a 500 mm area, whatever stage the work is at or whichever way it is inserted. It can now be set to positions without interference from the work feed and without limitations of size of work area.
- Page 3 10-µm by non-contact method ZX-GT is the only sensor with the ability to measure and locate position to an accuracy of 10 µm without contact. Unlike conventional through-beam laser sensors, the ZX-GT ’ s unique algorithm has the flexibility to meet a wide variety of applications, including the ability to accurately measure glass and mirror surfaces.
- Page 4 The detection of edges has been a problem for transparent objects with traditional transmission type sensors. However, ZX-GT adopts OMRON's unique MRC filter (Mirror Reflection Cut Filter) and CCD methodology. It can accurately detect work that reflects light such as mirror-finished surface or work that allows light to pass through such as glass (including coated glass).
-
Page 5: Electronic Components
Applications by industry Automotive & Automotive-components LCD & PDP <Outer diameter measurement> <Glass-edge measurement> Diameter measurement of metal objects Glass alignment for the FPD industry Semiconductor <Insertion-amount measurement> Diameter measurement of large-scale pipe Notch position detection of glass wafer Electronic components <Lead-pitch and diameter measurement>... - Page 6 Strong support tool The measurement data is gathered in the PCs in real time so it is easy to ascertain and analyse the current conditions at any time. Grasp the data trend and prevent defective parts Measurement result can be...
- Page 7 Longest in the industry 30-m cable extension The emitter and receiver do not need to be connected with each other. Each cable can be extended up to 30 m. It is perfectly suited for installation into large-scale production line. to DC24V...
-
Page 8: Ordering Information
ZX-XGC1R ZX-XGC2A ZX-XGC2R ZX-XGC5A ZX-XGC5R ZX-XGC8A ZX-XGC8R ZX-XGC20A ZX-XGC20R Up to two extension cables can be connected. However, be sure to limit the total extension cable length between the receiver and the Controller to 30 meters (including the receiver cable). -
Page 9: Specifications
*2: Linearity is given to be a typical error with respect to an ideal straight line when the distance between the emitter and receiver is 100 mm and light is blocked at a distance of 50 mm from the receiver. - Page 10 1.5ms(standard mode(NORM)) 0.5ms(high-speed mode(FAST)) (*2) Samples to average 1/2/4/8/16/32/64/128/256/512/1024/2048/4096 For current output: 4 to 20mA/F.S., max. load resistance 300 Ω For voltage output: ±4V, (±5 V, 1 to 5 V (*4)), output impedance 100 Ω Analog output(*3) Timing input, bank switching input, ON: short-circuited with 0V or 1.5V max.
-
Page 11: External Dimensions
Laser ON indicator (green) indicator (green) 54.1 Mounting hole dimensions 2-3.2 mm dia. holes Laser ON indicator (green) Optical axis Five, 6.5 mm dia. countersunk holes, depth 5 Laser alarm indicator(red) Optical axis setting indicator (green) 17.8 7.15 54.1 Optical... - Page 12 This document provides information mainly for selecting suitable models. Please read the User's Manual carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.