Step 4 Adjusting The Sensitivity - Omron Z550 Operation Manual

4
Adjusting the Sensitivity
Step
Adjust the sensitivity so that the light density will not become excessive or insufficient.
The default sensitivity adjustment method set at the shipment is [Multi].Select [Multi] under normal
circumstances.
1.
Select [Multi] as the sensitivity adjustment method.
Sensitivity adjustment method p.51
The multiple sensitivity setting screen appears.
2.
Check that the workpiece is positioned within the
measurement range and press the ENT Key.
The sensitivity level is registered.
5
Proceed to Step .
Basic Operations
Scn 0 Set
Auto
Fixed
Multi
Sen0's sensitivity method:
Normally select Multi.
ENT:Set ESC:Back
Line beam image
Scn 0 Set
Sensitivity set for each line.
Set the workpiece correctly
and press the ENT Key.
ENT:Set ESC:Back
SECTION 2
Z550
37
Operation Manual