Omron Z550 Operation Manual page 149

Changing the Trend Monitor Screen Display
It is possible to change the screen view mode and the waveform display range.
Changing View Mode
The following two types of view modes are provided.
This setting is the same as for the Profile Monitor screen. The setting that has been specified the
last will become effective.
Option
Thru Displays the waveform obtained from the sensor continuously.
(default setting)
Trig Displays a still waveform corresponding to the trigger timing.Updated when the trigger
turns on.
1.
Display the Trend Monitor screen and press the
SHIFT and ENT Keys.
The adjustment menu appears.
2.
Press the TRIG Key.
Other Functions
Meaning
Run
Scn 0
Thru
Mode
ESC TRG
Display
Sensitvy
Output
Meas set
Extra set
SECTION 4
ENT
Test
Z550
147
Operation Manual