Omron Z550 Operation Manual page 60

SECTION 3
Setting Measurement Conditions (Expert Menu)
1.
Select [Detect Set].
The selections for detection method appear.
2.
Move the cursor to [Height] or [Reflectance] and
press the ENT Key.
The selections for edge detection method appear.
3.
Choose the detection method and select the choice
by pressing the ENT Key.
Z550
58
Operation Manual
Scn 0 Set
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0 Set
Image
Detect set
Height
Meas set
Slant correct
Extra set
Height & Pos correct
Meas mode
Output
Scn 0 Set
Image
Detect set
Height
Height
Meas set
Slant correct
Reflectance
Extra set
Height & Pos correct
Meas mode
Output