Omron Z550 Operation Manual page 114

SECTION 3
Setting Measurement Conditions (Expert Menu)
1.
Select [Meas set].
The selections for output appear.
2.
Move the cursor to the output to be set and press
the ENT Key.
The selections appear.
3.
Select [Output].
The setting screen for output conditions appears.
4.
Select the type of value from the selections for
[Hold].
5.
Select [End].
The setting will be registered and the screen display returns to
Z550
112
Operation Manual
Scn 0 Set
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0 Set
OUT0:Height
OUT1:Step: 2 pts
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Scn 0 Set
Change
Calibrate
Output
Delete
Scn 0 Set
Upper [mm]
[ 0.125000]
Lower [mm]
[ -0.125000]
Hold
Zero [mm]
[ 0.000000]
Sampling
Span
[1.000000]
Offset [mm]
[ 0.000000]
Bottom
Slant error
Peak-Peak
Unit
Average
End
3
.
None
None
Peak
mm