Omron Z550 Operation Manual page 123

The screen for specifying the trigger off position appears.
The trigger off timing is not synchronized with the
TRG terminal; therefore, specify the times to turn
the trigger on and off on this screen.
The time at the cursor position (the time after the
trigger is turned on) appears in the lower part of
the screen. Specify the trigger off position using
this time as reference.
5.
Specify the trigger off position.
The setting screen for the measurement start position
appears.
6.
Specify the measurement start position.
If the trigger on position and the measurement target area
are different, specify the time difference.
The measurement start position can be the same as the
trigger on position if it is not necessary to specify the time
difference.
The setting screen for the measurement end position
appears.
7.
Specify the measurement end position.
Specify the end position when there is a time difference
between the completion of the measurement and the
trigger off timing.
The measurement end position can be the same as the
trigger off position if it is not necessary to specify the time
difference.
Setting Measurement Conditions (Expert Menu)
Hold
Trigger OFF 2151.36 ms
Time from trigger ON to
trigger OFF
Measurement start position
Hold
Through
Start of measurement
Time from trigger ON to
start of measurement
Trigger setting
Through
Start of measurement
End of measurement
Time from start to end of measurement
SECTION 3
Trigger-OFF position
239.04 ms
Measurement end position
239.04 ms
2151.36 ms
Z550
Operation Manual
121