Using The Force-Zero Function - Omron Z550 Operation Manual

SECTION 4
Other Functions

Using the Force-Zero Function

It is possible to register the height of a "0" reference value and output the measurement value as a ±
tolerance relative to this reference value.
Example 1: The height of the workpiece is set as the reference value, and the tolerance is output
Also, an offset value can be added to the "0" reference value.
Example 2: When "10" is set as the offset
How to Set the Offset Value
1.
Enter the Set mode and select [Meas set].
Z550
136
Operation Manual
as the measurement value.
0
(Reference value)
10
+2(Judgment upper limit)
-2(Judgment lower limit)
+12(Judgment upper limit)
+8(Judgment lower limit)
Scn 0 Set
Image
Detect set
Meas set
Extra set
Meas mode
Output