Omron Z550 Operation Manual page 24

SECTION 2
Basic Operations
Menu Tree
The Controller menus are hierarchical. Move the cursor to the required functions to set
measurement conditions.Use the following procedures to move around the menu tree.
1.
Move the cursor to the item you want to select.
Up/Down key: Moves the cursor.
2.
Press the ENT Key.
In this example, the cursor will move to the submenu
below [Image].
3.
Repeat this operation to move the cursor to lower
submenus.
Press the ESC Key once to move to the submenu
immediately above.
Z550
22
Operation Manual
Expert menu: Under [Set]
Scn 0 Set
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0 Set
Image
Meas method
Detect set Region
Meas set
Sensitivity
Extra set Details
Meas mode
Output