Omron Z550 Operation Manual page 81

The measurement line setting screen appears.
If [Reflectance] is specified as the detection
method, the screens shown in
appear.The measurement is made at the edge
level specified in [Reflectance correct/Edge
level].
p.64
4.
Specify the start and end lines.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
The edge level setting screen appears.
5.
Align the dotted line with the edge to be detected.
Up/Down key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
6.
Press the ENT Key to select the setting.
The selections appear.
7.
Select the edge search direction.
Setting Measurement Conditions (Expert Menu)
4. 9.
to do not
SECTION 3
Left Right
Right Left
Operation Manual
Z550
79