Omron Z550 Operation Manual page 87

Peak/Bottom
The peak or bottom in the selected region can be measured.
The following conditions will be used as an example for describing the setting procedures.
1.
Select [Meas set].
A list of outputs appears.
2.
Select an output for which [Peak/bottom] is set.
In this example, select [OUT1].
Setting Measurement Conditions (Expert Menu)
Peak
Position
Scn 0
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0
OUT0:Height
OUT1:
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
SECTION 3
Set
Set
Operation Manual
Z550
85