Omron Z550 Operation Manual page 63

1.
Select [Detect Set/Height&Pos correct/Reference].
A profile graph appears.
2.
Check that the workpiece is positioned correctly and
press the ENT Key.
The screen for setting the area in the height direction
appears.
Keep the default setting (the entire screen) if
compensation in the height direction is not
necessary.
3.
Specify the start and end lines.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
The characteristic quantity setting screen appears.
4.
Select the characteristic quantity to be used as the
reference point.
Select which position (peak, bottom, or average) within the
specified area will be measured.
The cross cursor indicating the measurement point moves
according to the selections.
Select the position while monitoring the image.
Setting Measurement Conditions (Expert Menu)
Scn 0 Set
Image
Detect set
Height
Meas set
Slant correct
Extra set
Height & Pos correct
Meas mode
Output
Average
Peak
Bottom
SECTION 3
None
Reference
Peak
Bottom
Z550
Operation Manual
61