Removing The Ac Driver - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Main Controller > Removing the AC Driver > Procedure
3) Pull out the Main Power Unit.
• 3 connectors
• 3 screws
Connector
x3
x3
Screw
4) Remove the Main Power Unit.
• 13 connectors
• 4 wire saddles
Connector
x13
12 Connectors
x4
Wire saddles
Wire saddles Main power unit
4 Parts Replacement and Cleaning > Main Controller > Removing the AC Driver > Procedure
Main Power Unit
Screw
F-4-84
F-4-85

Removing the AC Driver

■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.(Refer to page 4-84)
2) Remove the Right Rear Cover.
3) Remove the Left Rear Cover.(Refer to page 4-86)
4) Remove the Rear Cover.(Refer to page 4-89)
5) Remove the Rear Lower Cover.(Refer to page 4-91)
■ Procedure
1) Remove all the connector on the PCB and remove the AC Driver.
• 6 wire saddles
• 13 connectors (12 pieces for Not Japanese model)
• 3 screws
AC Driver
Wire saddles
x6
x13
Screw
x3
Wire saddles
Screw
13 Connectors
Screw
4-93
F-4-86
4-93