2
Technology > DCM > DCM > Import/export by service mode (internal)
5. Select PASSWD.
6. Enter the selection number displayed on the left side of the file to be selected.
2
Technology > DCM > DCM > Import/export by service mode (internal)
7. When the correct file is displayed, press ->.
F-2-482
8. Select PASSWD, enter a password from the software keyboard, and then press OK.
F-2-483
Note:
Specification of file selection display
•
" *" is displayed on the right side of the file to indicate that the file has been selected in
SELECT.
•
HDD : Up to 2 files are displayed in a screen.
Click here
2-270
F-2-484
F-2-485
2-270