E-Rds Setup - Canon imageRUNNER ADVANCE C5255 Series Service Manual

2
Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance

E-RDS Setup

■ Confirmation and preparation in advance
To monitor this machine with e-Maintenance/ imageWARE Remote, the following settings are
required.
(1) Advance confirmation
Confirm with the UGW administrator that the device to be monitored with e-Maintenance/
imageWARE Remote is registered in the UGW.
(2) Advance preparations
The following network-related information needs to be obtained from the user's system
administrator in advance.
Information item 1
IP address settings
• Automatic setting : DHCP, RARP, BOOTP
• Manual setting : IP address, subnet mask and gateway address to be set
Information item 2
Is there a DNS server in use?
If there is a DNS server in use, find out the following.
• Primary DNS server address
• Secondary DNS server address
Information item 3
Is there a proxy server?
If there is a proxy server in use, find out the following.
• Proxy server address
• Port No. for proxy server
Information item 4
Is proxy server authentication required?
If proxy server authentication is required, find out the following.
• User name and password required for proxy authentication
2 Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
(3) Network settings
Based on the results of the information obtained in (2) Advance preparations, make this
machine network related settings.
See Users' Guide for detailed procedures.
CAUTION:
When changes are made to the above-mentioned network settings, be sure to reboot
this machine.
2-206
2-206