Installation Safety Warnings For Juniper Networks Devices; Intrabuilding Ports Warning; Installation Instructions Warning - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
Related
Documentation

Installation Safety Warnings for Juniper Networks Devices

Intrabuilding Ports Warning

Installation Instructions Warning

512
T640 Site Preparation Checklist on page 117
Observe the following warnings before and during hardware equipment installation:
Intrabuilding Ports Warning on page 512
Installation Instructions Warning on page 512
Rack-Mounting Requirements and Warnings on page 513
Ramp Warning on page 516
WARNING: The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089) and require isolation
from the exposed OSP cabling. The addition of Primary Protectors is not
sufficient protection in order to connect these interfaces metallically to OSP
wiring.
WARNING: Read the installation instructions before you connect the hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
Copyright © 2017, Juniper Networks, Inc.