CHAPTER 25
Installation Safety Guidelines and
Warnings
Installation Safety Warnings for Juniper Networks Devices
Intrabuilding Ports Warning
Installation Instructions Warning
Copyright © 2016, Juniper Networks, Inc.
Installation Safety Warnings for Juniper Networks Devices on page 201
ACX500 Chassis Lifting Guidelines on page 206
Observe the following warnings before and during hardware equipment installation:
Intrabuilding Ports Warning on page 201
Installation Instructions Warning on page 201
Rack-Mounting Requirements and Warnings on page 202
Ramp Warning on page 206
WARNING:
The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089) and require isolation
from the exposed OSP cabling. The addition of Primary Protectors is not
sufficient protection in order to connect these interfaces metallically to OSP
wiring.
WARNING:
Read the installation instructions before you connect the hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
201