Download Print this page

Chassis Lifting Guidelines For An Acx5000 Router; Installation Safety Warnings For Juniper Networks Devices - Juniper ACX5048 Manual

Universal access router
Hide thumbs Also See for ACX5048:

Advertisement

ACX5048 and ACX5096 Universal Access Router
Related
Documentation

Chassis Lifting Guidelines for an ACX5000 Router

Related
Documentation

Installation Safety Warnings for Juniper Networks Devices

Supported Platforms
188
Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale
lover og forskrifter.
Aviso A descartagem final deste produto deverá ser efectuada de acordo
com os regulamentos e a legislação nacional.
¡Atención! El desecho final de este producto debe realizarse según todas las
leyes y regulaciones nacionales
Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets
alla lagar och föreskrifter.
General Safety Guidelines for Juniper Networks Devices on page 167
General Safety Warnings for Juniper Networks Devices on page 170
The weight of a 1 U fully loaded ACX5048 chassis is approximately 21.8 lb (9.9 kg); the
2 U ACX5096 SKU is approximately 32.5 lbs (14.74 kg). Observe the following guidelines
for lifting and moving an ACX5000 router:
CAUTION:
If you are installing the ACX5000 router above 60 in. (152.4 cm)
from the floor, either remove the power supplies, fan modules, and any
expansion modules before attempting to install the router, or ask someone
to assist you during the installation.
Before installing an ACX5000 router, read the guidelines in
for an ACX5000 Router" on page 45
power, environmental, and clearance requirements.
Before lifting or moving the ACX5000 router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Mounting an ACX5000 Router in a Rack or Cabinet on page 104
,
,
ACX Series
JCS 1200
M Series
Observe the following warnings before and during hardware equipment installation:
Intra-Building Ports Warning on page 189
Installation Instructions Warning on page 189
to verify that the intended site meets the specified
,
,
,
MX Series
PTX Series
T Series
Copyright © 2015, Juniper Networks, Inc.
"Site Preparation Checklist

Advertisement

loading

This manual is also suitable for:

Acx5096Acx5000Acx5048-acAcx5048-dcAcx5096-acAcx5096-dc