Figure 72: Do Not Grasp The Connector Edge; Figure 73: Do Not Rest The Edge Of A Line Card On A Hard Surface - Juniper EX9214 Hardware Manual
Ex series
Hide thumbs
Also See for EX9214:
- Hardware manual (350 pages) ,
- Quick start manual (13 pages) ,
- Hardware manual (385 pages)
Table of Contents
Advertisement
Copyright © 2017, Juniper Networks, Inc.
Figure 72: Do Not Grasp the Connector Edge
Never carry the line card while holding the faceplate with only one hand.
Do not rest any edge of a line card directly against a hard surface. See
Figure 73 on page
Figure 73: Do Not Rest the Edge of a Line Card on a Hard Surface
If you must rest a line card temporarily on an edge, place a cushion between
the edge and the surface.
Chapter 20: Maintaining and Replacing Line Card
217.
217
Advertisement
Table of Contents
Troubleshooting
